SCRAP TIPPERS

GT Semi Trailer offers a wide range of SCRAP TIPPERS or Scrap Tippers Trailers for its Worldwide customers. These type of Scrap Tippers can carry any king of scrap and can be reach to 60 Cbm capacity. We can produce these Scrap Tippers with Hardox , Raex material which is resistance to hard loads.

TECHNICAL HIGHLIGHTS

  • BPW, SAF or Certificated Turkish Axles
  • Self Steering or hydraulic steering axles
  • Pirelli, Bridgestone, Goodyear , Petlas , Sava brand tires
  • JOST or GOS Turkish brand parking leg and king pin
  • ST Quality Steel usage
  • Air or Mechanical Suspension
  • ABS and EBS brake system
  • Steel Rims

 

SCRAP TIPPERS

Volume 36 to 60 m3
Base/Side Walls Imported wear sheet in hardness of 400-450 Brinell in sheet thickness of 4/3 mm – 8/6 mm.
Front Panel – Rear Cover Wear sheet in hardness of 400-450 Brinell. Rear cover can be manufactured to be hydraulic, mechanic, middle open able or side open able.
Crosses and Other All sheets are minimum ST52 A1 quality steel.
Side Barrier Optionally, it is applied to prevent the materials carried like excavations, rocks, scraps from damaging the lower accessories by falling down.

Hydraulic:  Tipper movement is provided by  level 5 heavy telescopic cylinder brand certificated Hidromas Brand Turkish origin which provides 45 degree tilt angle. Oil tank will be added to trailer, hydraulic contact between trailer and conveyor, is provided by 2 sockets

Chassis: Strengthened “I” section centre members are welded automatically by submerged welding machine. They are welded between 120/14 mm bottom or top steel plate and 5 mm hub plate.

These racks are supported against being twisted with each other by binding them with axle beams

Short back bumper suitable for asphalt paver finisher

Axles:  Turkish Brand, BPW or SAF 3 x 9,12,14,16 Ton axles brake drum or disc

There are brake shoes and heavy brake levers suitable for TSE norms

Suspensions ; It is supplied with Turkish brand of 6 pcs of air cushion with Z leaf spring or mechanical leaf spring suspension with 12 mm x12 pcs of layer with 100 mm width

Brake System ; Wabco brand ABS or EBS braking system will be used.

Brake Chambers ; 1 Axles with T 30/30 emergency brake chamber,2 axles with T 30 service brake chambers

Electrical system ; 2×7 pin sockets – 24V, lights accord to standard in SAE rear stop lamps, side marker lamps, brake safety warning lamps and signal light fitted at the rear

2 tail & stop combined lamps (red)

2 turn signal combined lamps (orange)

1 license lamp (white)

Tires; 385/65 R22,5 or 12 R22,5 or 13 R22,5 or 315/80 R22,5 Bridgestone, Pirelli, Goodyear, Continental , Petlas

Rims; 11.75 R22.5 Jantsa – Jantas Brand

King Pin ; Jost  or equivalent Turkish brand OMS DIN 74080 standards 2’’ or 3,5’’ king pin detachable from below made by SAE standards 8 bolt type. With EU certificate.

Landing Gear ; Jost  or equivalent Turkish brand front Jack feet are telescopic ,parallel working ,double speed jointed with wide shoes static 50 tons, dynamic 25 tons capacity

Painting ; Before the painting, all surface is sand blasted

After sand blasting small parts are cleaned carefully

Epoxy gray is used for first protecting.

3 Times of high quality paints are applied on trailer

Thickness of painting checked by electronic devices

The color of trailer is selected by our customer according to RAL codes

Accessories;   Multi-piece plastic fenders that covers back axle shaft tires

1 plate tool box

Control Panel(Mob, air clock, access ramp lever)

Plastic water tank

Spare tire conveyor between trailer legs

Mounting and mounting space

Manuel or automatic tent system

SCRAP TIPPERS